ToolBase Services
The Home Building Industry's Technical Information Resource

Back to Standard View
Search TechnologiesAbout Technology Inventory
 
Browse by Building System


Symbol Legend
Adobe Acrobat Reader required for PDF documents

PDF documents require the free Adobe Reader.


All PDF documents open in a new browser window. Close the browser window to return to the site.

Crawlspace Ventilation Systems

Manage crawlspace moisture with mechanical ventilation dehumidification

An installed crawlspace ventilation system. The on-board computer performs timing and comparison routines to decide when to ventilate and when not to ventilate.

Whether crawlspace ventilation is necessary (or even detrimental) is a hotly debated topic among building scientists. Especially in humid climates, ventilating the crawlspace often adds undesirable moisture to the area. New products provide mechanical ventilation as that measure the moisture content of outdoor and crawlspace air and only provide ventilation when the outdoor air is drier than crawlspace air. Thus, systems prevent moisture from being added to the crawlspace due to ventilation.

The back of the Smartvent Crawlspace Ventilation System.  It can stabilize sub-floor moisture, helping protect hardwood floors from buckling or splitting.

Sensors and/or computer software monitor temperature, relative humidity, and water vapor in the crawlspace and the outdoor air to determine when ventilation will have a beneficial effect on crawlspace moisture and initiate ventilation when outdoor temperature is above a preset minimum. Ventilation can be initiated to decrease or increase crawlspace relative humidity.

When the outside air has less moisture than the crawlspace air, a fan exhausts the crawlspace air and replaces it with drier outdoor air. In addition to removing moisture, the fan can also help remove gases, odors, or radon that could migrate into the home.

Units are designed to fit within traditional masonry wall foundations.


Energy Efficiency

Environmental Performance

Quality and Durability

The system reduces moisture in the crawlspace so related conditions like mold and wood decay may be eliminated.


Medium

One system is secured in place with mortar, very similar to the installation technique for metal, louvered vents. The system requires an electrical receptacle (the unit has 40 watt draw).


The systems range in price from $225 - $500, dependent upon the number of sensors and sophistication of the controls. Mechanical crawlspace ventilation cost is more than four times the cost of passive devices.


Systems use very little electricity when the fan is not ventilating. When ventilating, the fans draw40-60 watts each and vary by manufacturer. Although there is some cost associated with operating the fan and controller, systems can improve whole-house energy efficiency and durability.


Section R408 of the International Residential Code 2003 (IRC) covers ventilation openings in crawlspace foundations. The code allows an exception to standard passive ventilation practice if continuously operated mechanical ventilation is provided at a rate of 1.0 cfm (10m2) for each 50 square feet (1.02 L/s) of underfloor space where the ground surface is covered with an approved vapor retarder material. One 60 cfm system would meet this code provision for a foundation sized 30 feet by 40 feet by 2.5 feet.


Not Applicable


Installation time varies by system selected and foundation. Usually one ventilator is adequately sized for afoundation. Systems can be hardwired or connected to a standard receptacle. Consult manufacturer’s installation guides for specfics.


SmartVent® offers a two-year warranty.


By managing crawlspace moisture, powered ventilation can help mitigate potential risks of mold and decay due to moisture.

Initial cost and the cost of operation are greater than passive ventilating louvers, but systems may improve the durability of crawlspaces and floor systems.

Disclaimer: The information on the system, product or material presented herein is provided for informational purposes only. The technical descriptions, details, requirements, and limitations expressed do not constitute an endorsement, approval, or acceptance of the subject matter by the U.S. Department of Housing and Urban Development (HUD/FHA), The Partnership for Advancing Technology in Housing (PATH), or any PATH-affiliated Federal agency or private company. There are no warranties, either expressed or implied, regarding the accuracy or completeness of this information. Full reproduction, without modification, is permissible.